ORCI Foam Cub
$43.99
This "Foam Cub" is a foamboard version of discontinued Multiplex Fun Cub! It is the roughly the same weight and size as the original Fun Cub. However it has more power and is much more 3D capable, and its able to fly in much tighter spaces!
(Electronics NOT Included)
Specifications
Wingspan: 54" / 1370mm
Length: 37.5" / 955mm
Kit Weight: 432g / 15.31oz (Without Electronics)
Motor: 2814 1100Kv
Battery: 1300 3s Lipo
Prop: 11" x 5.5"
Servos: 9g Plastic or Metal Geared
Tire Size: 5" Diameter
landing Gear: 3mm Thick
Extra Details
Warning This Product Is NOT water resistant!
In order to make this product water resistant you will need to paint or clear coat this plane. To do this we recommend using Rustoleum paint + primer as well as Rustoleum clearcoat to provide maximum resistance!
In order to paint this product shake can well and apply very thin coats letting the plane dry in between coats. After the first few coats are dry the plane will begin to seal, and you will be able to apply slightly heavier coats after the first three. DO NOT apply paint too heavy or else paper will delaminate and product will be damaged take your time! (Practice on a scrap piece of foam first before you Paint!)
If this product is landed in water without proper water resistance preparation it will delaminate and fall apart. DO NOT get this product near water without taking the proper sealing precautions first!
NOTE: If using this product for indoor use (Fieldhouse) or in places with no water you don't have to use paint as it does add a slight bit of weight.
